Burton Highshot Step OnBest overall- Lacing
- Sequence BOA
- Binding
- Step On compatible
- Liner
- Imprint 2 heat-moldable
- Heel hold
- LockUp inner cuff
Most recommended by reviewers
Check price at AmazonWe earn a commission when you buy through our links, at no extra cost to you. How this works.
If you've ever ended a snowboard day with numb toes or a heel sliding around in the boot, you know why this is the gear to get right. Riders in every forum we read say the same thing: boots matter more than the board, and the best boot is the one that fits your foot.
Our top pick is the Burton Highshot Step On, a responsive all-mountain boot with a single-dial BOA closure and a heat-moldable liner. Below it you'll find a soft boot for learning, a firmer boot for aggressive riding, a budget BOA boot, and a traditional lace-up for riders who prefer to tighten each section by hand.
1 Burton Highshot Step On | 2 Burton Moto BOA | 3 K2 Maysis | 4 K2 Raider | 5 System APX | |
|---|---|---|---|---|---|
| Best for | Best overall | Best for learning | Best for aggressive riding | Best budget BOA boot | Best traditional lace-up |
| Lacing | Sequence BOA | Single-Zone BOA | H4 Coiler BOA with TX3 rope | H4 Coiler BOA with TX3 rope | Traditional lace |
| Liner | Imprint 2 heat-moldable | Imprint 1+ heat-moldable | Not listed | Intuition comfort foam 3D | Thermofit heat-moldable |
| Check price at Amazon | Check price at Amazon | Check price at Amazon | Check price at Amazon | Check price at Amazon |
Burton Highshot Step OnBest overallMost recommended by reviewers
Check price at Amazon
Burton Moto BOABest for learning
K2 MaysisBest for aggressive riding
K2 RaiderBest budget BOA boot
System APXBest traditional lace-up
A responsive boot that clips straight into Step On bindings, no straps needed.
Most recommended by reviewers
Check price at AmazonPrices and availability on Amazon change often.
For most riders shopping for snowboard boots, the Burton Highshot Step On is the pick we'd make, especially if you want a boot that gets you onto the hill quickly.
The Highshot Step On pairs Sequence BOA lacing with a single dial that makes micro-adjustments easy, so fine-tuning fit takes seconds. Its Imprint 2 heat-moldable liner can be shaped to your foot to speed up break-in, and the LockUp inner cuff is built to improve heel hold. Stepping into compatible Step On bindings takes only seconds, which is a real convenience on busy mornings.
The step-in system only works with Step On bindings, which add to the overall cost of setup. If you already own traditional bindings or plan to switch later, that limitation matters. Riders who want a softer, more forgiving boot for learning may find the Moto BOA a better fit, while the Highshot's stiffer feel suits those ready to commit to step-in gear.
If it's not for you, the Burton Moto BOA suits beginners who want a soft, comfortable boot, and the K2 Maysis suits aggressive riders who push hard and want a sturdy build.
If strapping in at every lift is the part of the day you dread, this boot fixes it. You line it up with the binding and step down, and you are locked in.
It still rides like a proper all-mountain boot, with a responsive flex and a liner you can mold to your foot. Remember it needs matching Step On bindings to work.

A soft, comfortable boot that is easy to live in while you build skills.
Prices and availability on Amazon change often.
The Moto is among the softest boots in its class, which is exactly what you want while learning. It bends easily, so your ankles stay comfortable through long days of falling and getting back up.
It also suits playful park riders who value feel over raw power. Riders who later move to faster terrain will probably want something stiffer.





A firm, supportive boot with strong heel hold for fast all-mountain riding.
Prices and availability on Amazon change often.
The Maysis suits riders who want a firmer boot that responds quickly to input. Reviewers describe a good mix of tech and user-friendliness, and riders on forums mention it when talking about stiffer, more responsive boots.
One practical note: the dial is hard to reach once you are wearing snowboard pants over the boot, so adjust before you suit up.




BOA convenience and a comfortable liner at a much lower price than the premium boots.
Prices and availability on Amazon change often.
The Raider gives you the quick, easy BOA lacing found on boots that cost far more. Its Intuition foam liner and internal J-bars work to keep your heel down and your foot comfortable.
It is a sensible step up from rental boots for riders who want convenience without a premium price. Fewer reviewers cover it, so try it on before committing.

A low-profile lace-up with a heat-moldable liner and metal lace loops.
Prices and availability on Amazon change often.
A traditional lace-up that lets you tighten each section separately. Its heat-moldable liner is an inexpensive way to get a custom-feeling fit, and the metal lace loops are built to last.
Start with fit: every guide we read puts it ahead of brand, price and looks. Heel lift is the main red flag, because it tires you out and costs you control. Try boots on late in the day, when feet are slightly swollen, and wear your usual snowboard socks.
Next, match the flex to how you ride. Soft boots suit beginners and park riders, medium boots cover most all-mountain riding, and stiff boots reward fast, aggressive riders. Flex ratings differ between brands, so treat them as a rough guide.
BOA dials tighten with a twist and are easy to use with gloves. Traditional laces let you fine-tune each section and cost less. Step On boots clip straight into matching bindings but only work with that system.
New boots should feel snug, with your toes lightly touching the front and no heel lift. They pack out up to half a size during the first season, so a roomy fit in the shop becomes too loose later. Don't tighten so hard that your feet go numb after a few runs.
Boots are worth spending a little extra on because fit decides how much you enjoy the day. Quality boots in this guide run from roughly 190 to 480 dollars, but more expensive does not always mean better. A cheaper boot that fits beats a pricey one that doesn't.
Good boots combine a heat-moldable liner, a supportive shell, a grippy outsole and a lacing system like BOA. Premium models add extras such as dual lacing zones and cushioning for cold weather. Cheaper boots can work for casual riders but tend to wear out sooner.
There is no single best brand. Burton and K2 come up most often, and brands differ in width and volume. Riders say the best brand is whichever fits your foot, so try at least three. Models on this page include the Burton Highshot Step On, Burton Moto BOA, K2 Maysis, K2 Raider, and System APX.
Sizing varies by brand and model, so don't rely on shoe size alone. Measure your foot in Mondo or centimeters and try on several brands. This guide covers men's boots, so check each brand's women's sizing chart.
Why trust CheckedBest
This shortlist comes from comparing five snowboard boots on their listed features, flex and lacing, and checking every one is in stock now. Picks that show up again and again in expert guides and rider discussions rank higher. We weighed fit options, flex, warmth, and price.
Our expert team tests products when it is needed and researches online and in interviews. Every guide is fact-checked and edited by a real person.
The CheckedBest editorial team · Updated Nov 8, 2026
How we pickEditorial standardsAffiliate disclosureReport a mistake
We earn a commission when you buy through our links, at no extra cost to you. It never decides the winner.