The Best Rebar Tie Guns

We earn a commission when you buy through our links, at no extra cost to you. How this works.

A rebar tie gun replaces the slow, hard work of tying steel reinforcement by hand, which is tiring on the back and wrists and takes a crew hours on a big slab. The right tool depends on the size of your rebar, how many ties you make a day and whether you can keep batteries charged. Here is what is available right now.

Our top pick is the MAX RB443T TwinTier, the one that contractors in forum discussions say ties fastest and keeps working over time. Below it we cover a cordless budget option, a heavy-duty commercial tool and a mid-priced Makita kit for anyone who already owns Makita batteries.

The rundown

1MAX RB443T TwinTier, Rebar Tie GunsMAX RB443T TwinTier2NEWTRY Cordless Rebar Tying Machine, Rebar Tie GunsNEWTRY Cordless Rebar Tying Machine3Makita XRT01TK, Rebar Tie GunsMakita XRT01TK4SDLOOL Double Wire Rebar Tying Machine, Rebar Tie GunsSDLOOL Double Wire Rebar Tying Machine
Best forBest overallBest budget cordlessBest for Makita battery ownersBest heavy-duty value
Rebar rangeUp to #7 x #70.3 to 1.33 in (7 to 34 mm)Not listed#3 x #3 up to #7 x #7 (up to 1.8 in)
Wire19 gauge, works with TW1061T wire360 ft21 gauge19 gauge double wire
Tie speedUnder 0.5 seconds (dual wire feed)0.8 seconds per knot (38 to 42 knots per minute)Up to #5 bars, two #5 or four #4 bars per tie0.6 seconds
BatteriesNot listed2 x 2000mAh, 21VNot listed2 x 18V 5000mAh
Check price at AmazonCheck price at AmazonCheck price at AmazonCheck price at Amazon
1Best overall
MAX RB443T TwinTier, Rebar Tie GunsMAX RB443T TwinTier, Rebar Tie Guns, view 2MAX RB443T TwinTier, Rebar Tie Guns, view 3
1 / 3

MAX RB443T TwinTier

A dual-wire tie gun for crews that tie a lot of rebar and want the fastest ties on the market.

Rebar range
Up to #7 x #7
Wire
19 gauge, works with TW1061T wire
Tie speed
Under 0.5 seconds (dual wire feed)
Replaces
RB441T (same wire and accessories)

Most recommended by reviewers

Check price at Amazon

Prices and availability on Amazon change often.

Why we picked the MAX RB443T TwinTier

We think the MAX RB443T TwinTier is the best overall pick for anyone who wants fast, economical tying on rebar up to #7 x #7.

What we like

The dual wire feeding mechanism is the standout feature, and the maker says it roughly doubles tying speed, with each tie completed in under 0.5 seconds. The wire pull-back mechanism dispenses only the amount needed, which reduces waste and cuts cost over a large job. The shorter tie height also means less concrete is needed to cover each tie. It uses 19 gauge TW1061T wire and replaces the RB441T, so existing accessories carry over.

Worth knowing

The MAX is expensive, and the forum thread notes that these guns must be kept charged before use. If the price is a concern, the SDLOOL offers a similar dual-wire design on heavier bars for less, and the NEWTRY suits lighter budgets.

If it's not for you, the NEWTRY Cordless Rebar Tying Machine suits buyers on a tight budget, while the SDLOOL Automatic Double Wire Rebar Tying Machine is a strong heavy-duty value with a three-year warranty.

Read our full take

Why it's our top pick

In the community thread, a crew that owns several MAX guns says they tie at least two to three times faster than other brands they have used. The same thread says other brands ended up not working correctly after a while, while the MAX guns usually keep working well and parts are easy to get.

The RB443T carries that reputation forward with a dual wire feed and a wire pull-back mechanism that dispenses only the wire each tie needs. It is the tool to buy when tying speed and long-term reliability matter more than price.

2Best budget cordless
NEWTRY Cordless Rebar Tying Machine, Rebar Tie GunsNEWTRY Cordless Rebar Tying Machine, Rebar Tie Guns, view 2NEWTRY Cordless Rebar Tying Machine, Rebar Tie Guns, view 3NEWTRY Cordless Rebar Tying Machine, Rebar Tie Guns, view 4NEWTRY Cordless Rebar Tying Machine, Rebar Tie Guns, view 5
1 / 5

NEWTRY Cordless Rebar Tying Machine

A low-cost cordless tie gun that handles the common rebar sizes, with two batteries so one can charge while the other works.

Rebar range
0.3 to 1.33 in (7 to 34 mm)
Tie speed
0.8 seconds per knot (38 to 42 knots per minute)
Batteries
2 x 2000mAh, 21V
Wire coil
360 ft
Weight
3.2 lb
Check price at Amazon

Prices and availability on Amazon change often.

Pros

  • Dual batteries allow near-continuous tying
  • Nine tightness settings to avoid wire breakage
  • Brushless motor and transparent housing make wire loading easy to check

Cons

  • Speed and battery figures vary between NEWTRY listings, so check the one you buy
  • Not a substitute for a commercial tool on a large project
Read our full take

Why we like it

For a contractor or homeowner who needs a cordless gun without a large budget, the NEWTRY covers the typical 0.3 to 1.33 inch range and ships with two batteries and a wire coil. The nine-step tightness dial is useful for matching the tie to different bar sizes, and the clear housing shows the wire path, which makes setup less of a guessing game.

It is not built for all-day heavy commercial use, but for light to medium jobs it is a sensible starting point.

3Best for Makita battery owners
Makita XRT01TK, Rebar Tie GunsMakita XRT01TK, Rebar Tie Guns, view 2Makita XRT01TK, Rebar Tie Guns, view 3Makita XRT01TK, Rebar Tie Guns, view 4Makita XRT01TK, Rebar Tie Guns, view 5
1 / 5

Makita XRT01TK

A brushless Makita tie tool with a 5.0Ah battery, for anyone who already runs Makita 18V batteries.

Battery
18V LXT 5.0Ah
Tie capacity
Up to #5 bars, two #5 or four #4 bars per tie
Modes
Single or continuous tie actuation
Wire gauge
21 gauge
Check price at Amazon

Prices and availability on Amazon change often.

Pros

  • Brushless motor runs cooler and lasts longer
  • Works with the Makita 18V LXT battery platform
  • Automatic locking wire reel is quick to load

Cons

  • Costs more than the NEWTRY and uses 21 gauge wire, so check it matches your coils
  • Tie capacity is smaller than the MAX and SDLOOL heavy-duty tools
Read our full take

Why it fits

If your shop already runs Makita 18V batteries, this kit slots straight into the system you own. The brushless motor is designed to run cooler and last longer, and the two-mode trigger lets you pick between single ties and continuous feed. Rebar capacity is lower than the top heavy-duty tools, so it suits general site work rather than the largest bars.

4Best heavy-duty value
SDLOOL Double Wire Rebar Tying Machine, Rebar Tie GunsSDLOOL Double Wire Rebar Tying Machine, Rebar Tie Guns, view 2SDLOOL Double Wire Rebar Tying Machine, Rebar Tie Guns, view 3SDLOOL Double Wire Rebar Tying Machine, Rebar Tie Guns, view 4SDLOOL Double Wire Rebar Tying Machine, Rebar Tie Guns, view 5
1 / 5

SDLOOL Double Wire Rebar Tying Machine

A dual-wire tie gun with two 5000mAh batteries that covers rebar up to #7 for steady daily use.

Rebar range
#3 x #3 up to #7 x #7 (up to 1.8 in)
Wire
19 gauge double wire
Tie speed
0.6 seconds
Batteries
2 x 18V 5000mAh
Warranty
3 years
Check price at Amazon

Prices and availability on Amazon change often.

Pros

  • Dual-wire feed for fast ties on heavier bars
  • Two large batteries allow long uninterrupted work
  • Three-year warranty stated

Cons

  • Priced well above the NEWTRY, and the forum does not cover this brand
  • Listing specs are largely from the manufacturer, not independent tests
Read our full take

Why it's a strong alternative

For crews that need the heavy-duty range of the MAX but not the MAX price, the SDLOOL offers dual-wire feeding across the full #3 to #7 range and large batteries that keep it working through a shift. The three-year warranty is a useful safety net. The evidence is mostly manufacturer listing data, so check the warranty terms before buying.

FAQ

Who needs a rebar tie gun?

A rebar tie gun pays off on any site where you tie steel reinforcement regularly. Manual tying is hard on the hands and back, and a powered tool can reduce that strain. Keep the tool charged, buy wire that matches the tool, and buy from a supplier that stands behind its product.

What to look for?
  • Rebar range: match the tool to the bar sizes you tie most often.
  • Wire gauge: check that the tool takes the wire you buy (19 gauge on the MAX and SDLOOL, 21 gauge on the Makita).
  • Batteries: a second battery means one can charge while you work.
  • Tie speed: a faster tie cuts labour on large jobs.
What's the best rebar tie gun?

The MAX RB443T TwinTier is the top pick for contractors who tie a lot of rebar. Forum users report it ties faster and keeps working longer than other brands.

What is the best cheap rebar tie gun?

The NEWTRY cordless rebar tying machine is the budget pick. It covers the common 0.3 to 1.33 inch range with two batteries included.

What is the best cordless rebar tie gun?

The NEWTRY cordless model and the Makita XRT01TK are both cordless. Choose the NEWTRY on price or the Makita if you already own 18V LXT batteries.

How does a rebar tie gun work?

You place the gun over two crossing bars, the tool feeds wire around them, twists it tight and cuts the end. Most models tie in under a second.

Are rebar tie guns worth it?

Yes on any site with steel reinforcement. A forum user notes they are an investment and must be kept charged, but they are much faster than hand tying and reduce strain.

Meet the reviewer

Huvasan Reddy

Huvasan Reddy

Fact checker and editor

An experienced e-commerce editor and fact-checker specialising in product information, pricing, specifications and online retail content. Focused on ensuring accuracy, credibility and consumer confidence through clear, reliable and informative content.

    Add CheckedBest as a preferred source on Google

    Why trust CheckedBest

    How we made this guide

    • 4 Amazon listings checked
    • 4 Products compared
    • 5 Expert and community sources

    This shortlist is built from four Amazon listings that were in stock at the time of writing, weighed against the specs in each listing and what contractors and forum users say about them after real jobs. The picks cover a range of budgets, power sources and tie capacity.

    Our expert team tests products when it is needed and researches online and in interviews. Every guide is fact-checked and edited by a real person.

    The CheckedBest editorial team · Updated Nov 7, 2026

    Checking our work: 4 sources

    We earn a commission when you buy through our links, at no extra cost to you. It never decides the winner.