Hanboost C1 Wireless Ultrasonic CutterBest overall- Weight
- 205 g
- Power modes
- 3
- Battery
- 3000 mAh USB-C, 2-3 hours
- Auto shut-off
- 5 minutes
Most recommended by reviewers
Check price at Amazon
Hanboost C1 Wireless Ultrasonic CutterBest overallRunner-up2
JAKEMY Corded Ultrasonic CutterBest corded powerWe earn a commission when you buy through our links, at no extra cost to you. How this works.
If you remove 3D print supports, trim model parts or cut plastic and wood for craft work, an ultrasonic cutter can save you from broken details and rough edges. The Hanboost C1 is our top pick: a fully cordless tool that is light, has three power modes and is recommended by the maker community for removing printed parts from scaffolds.
The other four picks cover corded power, a longer-running battery, a larger blade set and a budget option. Expert reviewers note that a good ultrasonic cutter is most useful if you print delicate models often; for occasional use, side cutters may do the job.
1 Hanboost C1 Wireless Ultrasonic Cutter | 2 JAKEMY Corded Ultrasonic Cutter | 3 EasyWox Wireless Ultrasonic Cutter | 4 Saker Ultrasonic Precision Cutter Kit | 5 JAKEMY Cordless Ultrasonic Cutter | |
|---|---|---|---|---|---|
| Best for | Best overall | Best corded power | Longest battery life | Best kit for beginners | Best for cutting continuously |
| Battery | 3000 mAh USB-C, 2-3 hours | Not listed | 4000 mAh, up to 90 minutes | 1000 mAh, up to 1 hour | 1000 mAh replaceable |
| Blade change | Tool-free, hidden hex wrench | 5 types | 50 in 5 types | 52 with polishing heads | Not listed |
| Modes | Not listed | 4 (off, low, high, auto) | Not listed | 2 (manual, auto) | 3 (off, on, auto) |
| Check price at Amazon | Check price at Amazon | Check price at Amazon | Check price at Amazon | Check price at Amazon |
Hanboost C1 Wireless Ultrasonic CutterBest overallMost recommended by reviewers
Check price at Amazon
JAKEMY Corded Ultrasonic CutterBest corded power
EasyWox Wireless Ultrasonic CutterLongest battery life
Saker Ultrasonic Precision Cutter KitBest kit for beginners
JAKEMY Cordless Ultrasonic CutterBest for cutting continuously




A fully cordless, lightweight ultrasonic cutter for 3D print supports and model detail work.
Most recommended by reviewers
Check price at AmazonPrices and availability on Amazon change often.
One catchIts power rating is not stated, so harder materials may need the higher mode.
The C1 is the most complete cordless option here. At 205 g it is easy to hold for long sessions, and the three power modes let you move from fine support removal to thicker plastic and leather. The built-in LED and hidden hex wrench are practical touches for working at a bench.
A maker community review recommends it for removing printed parts from the scaffold, which is the job it is designed for.





A corded 35 W cutter with four modes and a grinding attachment option.
Prices and availability on Amazon change often.
Corded power means no battery to run down mid-project, and the 35 W output is strong for thicker plastics. The auto mode adjusts power for you, which helps with mixed materials. Five blade types cover fine support removal through wood carving.
It does not run on battery, so it suits a fixed workbench rather than portable work.





A cordless cutter with a 4000 mAh battery and 50 blades for long sessions.
Prices and availability on Amazon change often.
The 4000 mAh battery gives the longest cordless runtime among the picks, which matters if you work through a stack of prints. The 50 blades in five shapes mean fewer trips to buy spares, and the TFT screen shows battery and fan status at a glance.
At 0.49 lb it is still light, though the Hanboost is lighter.





A complete kit with case, charger and 52 blades for a ready-to-use setup.
Prices and availability on Amazon change often.
If you want everything in one box, the Saker kit includes a case, a 30 W adapter and 52 blades including polishing heads. The OLED display and operation lock make it simple to use without reading a manual first.
The 1000 mAh battery runs about an hour, so it is best for shorter sessions or use while charging.





A cordless 35 W cutter with a micro fan that aims to keep cutting for longer.
Prices and availability on Amazon change often.
This is the cordless version of the corded JAKEMY, with the same 35 W output and a replaceable 1000 mAh battery. The micro fan and auto mode are aimed at longer cutting sessions with thicker plastic.
The 60-minute run time is the maker's figure and is not independently checked.
Most people do not need one. Expert advice suggests side cutters work almost as well for typical work. An ultrasonic cutter is most useful if you often print delicate models and break them when removing supports.
If you cut mainly thick material or do general sprue removal, a good pair of sprue cutters may be enough. Community reviewers describe ultrasonic cutters as a nice-to-have rather than essential. Pet owners should also note that the high-frequency sound can bother some dogs.
It vibrates the blade at around 40,000 times per second. The fast vibration lets the blade slice through material with little pressure, which reduces tearing and cracking.
For thicker plastics, the corded JAKEMY offers steady 35 W output. For cordless work, the Hanboost C1 is our top pick for lighter 3D print cleanup.
The Hanboost C1 is our top pick for most 3D printing and craft work because it is cordless, light and has three power modes.
Ultrasonic cutters are designed for materials like plastic, resin and wood. Use the finger guards and avoid touching the blade while it runs, as the listings advise.
None of the picks here are pizza cutters, and ultrasonic tools are not designed for food. For food, a conventional pizza cutter with a guarded blade is the safer choice.
Why trust CheckedBest
The shortlist is built from five Amazon listings that are in stock now, compared on power, blade range, battery and cooling. Recommendations draw on editorial reviews and maker community discussions.
Our expert team tests products when it is needed and researches online and in interviews. Every guide is fact-checked and edited by a real person.
The CheckedBest editorial team · Updated Nov 8, 2026
How we pickEditorial standardsAffiliate disclosureReport a mistake
We earn a commission when you buy through our links, at no extra cost to you. It never decides the winner.