The Best Filament Dryers

We earn a commission when you buy through our links, at no extra cost to you. How this works.

If your prints are stringing, clogging or coming out brittle, damp filament is often the cause. A filament dryer heats your spools to drive moisture out and keeps them dry while you print.

Our top pick is the Creality Space Pi Filament Dryer Plus. It has dual heaters that circulate warm air around two spools, reaches 70°C, and suits anyone running two materials or two printers. The other picks cover single spools, budget use and four-spool setups.

The rundown

1Creality Space PI Plus, best filament dryerCreality Space PI Plus2SUNLU Filament Dryer S2, best filament dryerSUNLU Filament Dryer S23EIBOS Cyclopes Filament Dryer, best filament dryerEIBOS Cyclopes Filament Dryer4Sovol SH01 Filament Dryer, best filament dryerSovol SH01 Filament Dryer5Creality Space Pi X4, best filament dryerCreality Space Pi X4
Best forBest overallBest single-spoolBest for multi-spool storageBest budgetBest for high-volume
Max temperature70°C70°C70°C50°C85°C
CapacityTwo spoolsSingle spool (210×85 mm)Two 1 kg or four 0.5 kg spoolsTwo 1 kg spoolsFour 1 kg or two 2 kg spools
Check price at AmazonCheck price at AmazonCheck price at AmazonCheck price at AmazonCheck price at Amazon
1Best overall
Creality Space PI Plus, best filament dryerCreality Space PI Plus, best filament dryer, view 2Creality Space PI Plus, best filament dryer, view 3Creality Space PI Plus, best filament dryer, view 4Creality Space PI Plus, best filament dryer, view 5
1 / 5

Creality Space PI Plus

A dual-spool dryer with dual PTC heaters and a touchscreen, best for two-material or two-printer setups.

Max temperature
70°C
Capacity
Two spools
Timer
0–48 hours

Most recommended by reviewers

Check price at Amazon

Prices and availability on Amazon change often.

Why we picked the Creality Space PI Filament Dryer Plus

The Creality Space PI Filament Dryer Plus is our best overall pick for anyone who wants to dry two spools at once with plenty of control.

What we like

Two PTC heaters circulate warm air around both spools, and reviewers note that the touchscreen and its 12 material presets make setup simple. Its timer runs from 0 to 48 hours, the longest of the picks we compared, and the two filament outlets suit either a dual-material setup or a workflow that feeds two printers. Owner reports were not available for this pick.

Worth knowing

The footprint is larger than the single-spool options, so make sure you have the shelf space. Reviewers also advise confirming the exact Plus model before ordering, since the Plus and V2 Plus variants differ.

If it's not for you, the SUNLU Filament Dryer S2 suits a single printer with a compact box, while the Sovol SH01 fits a tighter budget but tops out at 50°C.

Read our full take

Why it's our top pick

Reviewers highlight dual PTC heaters that circulate warm air evenly around two spools, reaching 70°C. The touchscreen and material presets make setup simple, and the two filament outlets suit workflows running two materials or two printers.

It is larger than single-spool units, so it suits a dedicated spot near the printer rather than a shelf.

2Best single-spool
SUNLU Filament Dryer S2, best filament dryerSUNLU Filament Dryer S2, best filament dryer, view 2SUNLU Filament Dryer S2, best filament dryer, view 3SUNLU Filament Dryer S2, best filament dryer, view 4SUNLU Filament Dryer S2, best filament dryer, view 5
1 / 5

SUNLU Filament Dryer S2

A compact single-spool dryer with 360° heating and a 4.6-inch touchscreen, for one printer and one material at a time.

Max temperature
70°C
Capacity
Single spool (210×85 mm)
Display
4.6-inch touchscreen
Check price at Amazon

Prices and availability on Amazon change often.

Pros

  • Compact format suits a single-printer workflow
  • Display shows temperature, time, humidity and countdown
  • Documented 70°C maximum

Cons

  • Not intended for a two-spool workflow
Read our full take

Why we like it

The S2 is a compact dryer for a printer that normally runs one material at a time. Its display reports temperature, time, humidity and filament type, and it reaches 70°C.

Reviewers note it is not built for two spools, so buy it for a single-printer setup.

3Best for multi-spool storage
EIBOS Cyclopes Filament Dryer, best filament dryerEIBOS Cyclopes Filament Dryer, best filament dryer, view 2EIBOS Cyclopes Filament Dryer, best filament dryer, view 3EIBOS Cyclopes Filament Dryer, best filament dryer, view 4EIBOS Cyclopes Filament Dryer, best filament dryer, view 5
1 / 5

EIBOS Cyclopes Filament Dryer

A large dryer with a 100W PTC heater and built-in fan, holding two 1 kg spools or four 0.5 kg spools.

Heater
100W PTC with fan
Capacity
Two 1 kg or four 0.5 kg spools
Max temperature
70°C
Check price at Amazon

Prices and availability on Amazon change often.

Pros

  • Active air circulation from fan and PTC heater
  • Runtime up to 24 hours or continuous
  • Multi-spool capacity

Cons

  • Large footprint
Read our full take

Why we like it

Reviewers praise the active fan and PTC heater, which move air through the box. It holds two 1 kg spools or four 0.5 kg spools and can run up to 24 hours.

The size is the trade-off, so it suits multi-spool users with room for it.

4Best budget
Sovol SH01 Filament Dryer, best filament dryerSovol SH01 Filament Dryer, best filament dryer, view 2Sovol SH01 Filament Dryer, best filament dryer, view 3Sovol SH01 Filament Dryer, best filament dryer, view 4Sovol SH01 Filament Dryer, best filament dryer, view 5
1 / 5

Sovol SH01 Filament Dryer

A budget dryer for two standard spools with a 40–50°C range and a 6–12 hour timer.

Max temperature
50°C
Capacity
Two 1 kg spools
Timer
6–12 hours
Check price at Amazon

Prices and availability on Amazon change often.

Pros

  • Holds two standard 1 kg spools
  • Silicone and PTFE seal for storage without power
  • Real-time temperature and humidity display

Cons

  • 50°C ceiling is too low for filament makers who call for higher temperatures
Read our full take

Why we like it

The SH01 is a sensible pick for a tight budget. It holds two standard spools, shows temperature and humidity, and seals well enough to store filament without power.

Check your filament maker's drying temperature first, since the 50°C limit won't reach what some materials need.

5Best for high-volume
Creality Space Pi X4, best filament dryerCreality Space Pi X4, best filament dryer, view 2Creality Space Pi X4, best filament dryer, view 3Creality Space Pi X4, best filament dryer, view 4Creality Space Pi X4, best filament dryer, view 5
1 / 5

Creality Space Pi X4

A four-spool dryer with dual 200W heaters reaching 85°C, for high-volume and engineering filaments.

Max temperature
85°C
Capacity
Four 1 kg or two 2 kg spools
Heaters
Dual 200W PTC
Check price at Amazon

Prices and availability on Amazon change often.

Pros

  • Dual independent heating chambers
  • Reaches 85°C for engineering filaments like PA and PC
  • Single-chamber mode saves energy

Cons

  • Highest price of the picks
Read our full take

Why we like it

Reviewers note the dual 200W heaters reach 85°C, enough for engineering filaments such as PA, PAHT and PC. It holds four standard spools and can run one chamber to save energy.

It is the most expensive pick, so it suits high-volume users.

FAQ

Which dryer suits you?

Pick a single-spool dryer for one printer and one material. Choose a dual or four-spool unit if you run several materials or printers at once.

When should you skip a dryer?

If your filament is dry and stored well, a dryer may not be needed. Check the drying temperature your filament maker recommends before buying.

What is the best filament dryer?

The Creality Space Pi Filament Dryer Plus is our top pick. Its dual heaters dry two spools evenly up to 70°C, and it suits two-material or two-printer setups.

What is the best filament dryer for Bambu printers?

Any of the single-spool picks works for a Bambu printer, such as the SUNLU S2 for a compact setup. Match the dryer to how many spools you print from.

What is the best filament dryer for nylon and PA6-CF?

Nylon and PA6-CF need higher temperatures. The Creality Space Pi X4 reaches 85°C, which suits engineering filaments like PA and PAHT.

Do you need a filament dryer, and can filament be too dry?

Many filaments absorb moisture from the air, so a dryer helps prints come out cleanly. Over-drying is rarely a problem, but follow your filament maker's drying temperature and time.

Meet the reviewer

Luka Lucheski

Luka Lucheski

Commerce Writer & Editor

Luka Lucheski is a content writer and editor with more than five years of experience in commerce content and digital publishing. He specializes in product reviews, buying guides, and comparison content. Over the years, he has edited and reviewed hundreds of articles across a wide range of categories, from tech and software to ecommerce and everyday consumer products.

    Add CheckedBest as a preferred source on Google

    Why trust CheckedBest

    How we made this guide

    • 5 Amazon listings compared
    • 2 Expert reviews read
    • 6 Community discussions read

    Every dryer here is in stock on Amazon today, and each one was checked against its listing and against what experts and owners say about heat, capacity and ventilation. Picks are weighed on how well they dry filament and how they handle moisture, not on lab numbers.

    Our expert team tests products when it is needed and researches online and in interviews. Every guide is fact-checked and edited by a real person.

    The CheckedBest editorial team · Updated Nov 5, 2026

    Checking our work: 12 sources

    We earn a commission when you buy through our links, at no extra cost to you. It never decides the winner.