ICZW Filament Extruder RecyclerBest overall- Max temperature
- 300°C
- Motor speed
- 0 to 40 RPM
- Nozzles
- 1.75 mm and 2.3 mm
- Screw
- 16 mm, 1:4 ratio
Most recommended by reviewers
Check price at Amazon
ICZW Filament Extruder RecyclerBest overallRunner-up2
ZHLINGQ PET Bottle Filament ExtruderBest for PET bottlesWe earn a commission when you buy through our links, at no extra cost to you. How this works.
A filament recycler turns failed prints, scraps and plastic bottles back into 1.75 mm spool feedstock.
Our No. 1 pick is the ICZW Filament Extruder Recycler, the most complete option in this set with dual temperature control and two nozzle sizes. The other picks cover a bottle-to-filament route and a 1.75 mm desktop maker.
1 ICZW Filament Extruder Recycler | 2 ZHLINGQ PET Bottle Filament Extruder | 3 Moupeaktain Filament Recycler | |
|---|---|---|---|
| Best for | Best overall | Best for PET bottles | Best compact desktop |
| Max temperature | 300°C | 300°C | 300°C |
| Weight | Not listed | 2.4 kg | 2.4 kg |
| Filament tolerance | Not listed | ±0.05 mm | 1.75 mm |
| Check price at Amazon | Check price at Amazon | Check price at Amazon |
ICZW Filament Extruder RecyclerBest overallMost recommended by reviewers
Check price at Amazon
ZHLINGQ PET Bottle Filament ExtruderBest for PET bottles
Moupeaktain Filament RecyclerBest compact desktop




The most complete setup here: dual heating zones, two nozzle sizes and a 300°C ceiling for PETG and ABS.
Most recommended by reviewers
Check price at AmazonPrices and availability on Amazon change often.
The ICZW Filament Extruder Recycler is our top overall pick for home and studio use, mainly because it gives you the most control over the melt and the most flexibility in output.
The ICZW ships with two nozzles, 1.75 mm and 2.3 mm, so you can make filament for common printers or a thicker strand without buying extra parts. Its dual temperature zones let you preheat the rear section and run the front hotter, which reviewers note helps produce a steadier melt. It reaches 300°C and handles PETG, PLA and ABS, and its 0 to 40 RPM motor gives you room to dial in the extrusion speed.
The machine needs clean pellets no larger than 3 mm, so shredded scraps will need some prep before they go in. You also have to wait until the temperature reaches 220°C before feeding material. If you want a simpler, one-click experience that handles bottles with less setup, the ZHLINGQ PET Bottle Filament Extruder suits that need better, and the moupeaktain Filament Recycler suits a tight footprint with integrated winding.
If it's not for you, the ZHLINGQ PET Bottle Filament Extruder is the better fit for quiet, bottle-focused classrooms, and the moupeaktain Filament Recycler suits small rooms that need a compact, all-in-one desktop unit.





Aimed at turning plastic bottles into filament, with a quiet motor and a compact footprint for a shared bench.
Prices and availability on Amazon change often.





An all-in-one desktop unit with heating, drawing and winding in one body, aimed at beginners.
Prices and availability on Amazon change often.
Recyclers make most sense for print farms, makerspaces and classrooms that go through a lot of material. The one expert review and the reader forums both say individual hobbyists rarely save enough to cover the machine.
If you print a few spools a year, buying new PLA is usually cheaper than a recycler. Mixing plastics also needs a full purge between types, which adds time and waste.
The ICZW is the most complete option here, with dual temperature zones and both 1.75 mm and 2.3 mm nozzles. It is best for makers who want control over the melt.
The ZHLINGQ and moupeaktain are the most affordable picks in this set. Check the price on Amazon, since prices change often.
Prices are shown live on Amazon and may change.
They heat plastic to a molten state, push it through a nozzle and draw it into a filament strand that is wound onto a spool. Most units need pellets or shredded scraps.
Yes, failed prints and scraps can be shredded and re-extruded, though quality is usually lower than new spools.
Why trust CheckedBest
These picks are built from three Amazon listings that were checked for stock before they were included. We weighed the reader discussions and the one expert review about these machines, and what each product's listing says it can do.
Our expert team tests products when it is needed and researches online and in interviews. Every guide is fact-checked and edited by a real person.
The CheckedBest editorial team · Updated Nov 7, 2026
How we pickEditorial standardsAffiliate disclosureReport a mistake
We earn a commission when you buy through our links, at no extra cost to you. It never decides the winner.