Burbifro Point to Point Starlink Long Range Kit, 2 PackBest overall- Range
- Up to 3 km (listing)
- Antenna gain
- 18dBi
- Band
- 5.8GHz
- Power
- 24V PoE injector included
Most recommended by reviewers
Check price at Amazon
Burbifro Point to Point Starlink Long RangeBest overallRunner-up2
Burbifro Point to Point Starlink Extender,Best valueWe earn a commission when you buy through our links, at no extra cost to you. How this works.
In this category, the key trade-off is range against simplicity. Longer-range links need bigger antennas and more careful alignment, while compact kits are quicker to set up but reach less far. The Burbifro Point to Point Starlink Long Range Kit, 2 Pack gets that balance right for most people: it covers up to 3 km with 18dBi antennas and includes a PoE injector.
If your Starlink dish sits far from the room where you need internet, a point to point wireless bridge can carry the connection across open ground without trenching cable. It suits barns, shops, guest houses and remote workspaces. Lower-cost kits, a pre-configured pair and a dual-gigabit option for security cameras are also covered below.
1 Burbifro Point to Point Starlink Long Range Kit, 2 Pack | 2 Burbifro Point to Point Starlink Extender, 5.8GHz 3KM | 3 eoqo Point to Point Starlink WiFi Extender with Bracket Mounts, 2 Pack | |
|---|---|---|---|
| Best for | Best overall | Best value | Easiest setup |
| Range | Up to 3 km (listing) | Up to 3 km (listing) | Up to 3 km (listing) |
| Antenna gain | 18dBi | 18dBi | 14dBi |
| Band | 5.8GHz | 5.8GHz | 5.8GHz |
| Ports | Gigabit | Two RJ45 LAN ports | Two RJ45 ports, 10/100Mbps |
| Price | Check Amazon for current price | Check Amazon for current price | Check Amazon for current price |
| Check price at Amazon | Check price at Amazon | Check price at Amazon |
Burbifro Point to Point Starlink Long Range Kit, 2 PackBest overallMost recommended by reviewers
Check price at Amazon
Burbifro Point to Point Starlink Extender, 5.8GHz 3KMBest value
eoqo Point to Point Starlink WiFi Extender with Bracket Mounts, 2 PackEasiest setup




A two-unit 5.8GHz bridge kit with 18dBi antennas and a PoE injector, built to link Starlink to a building up to 3 km away.
Most recommended by reviewers
Check price at AmazonPrices and availability on Amazon change often.
One catchReal throughput is listed at about 200Mbps over the bridge, below the gigabit ports.





A lower-priced Burbifro pair with the same 3 km range and 18dBi antennas, adding two LAN ports and IP65 weatherproofing.
Prices and availability on Amazon change often.





A factory pre-configured two-unit kit with dual adjustable brackets, aimed at people who want to plug in and go.
Prices and availability on Amazon change often.





A complete kit with two dual-gigabit bridges, a WiFi 6 AX3000 router and 24V/48V PoE, for larger properties and camera systems.
Prices and availability on Amazon change often.
Start with distance and speed. For a shop or barn within about 500 feet, any of the 5.8GHz pairs above will do; the retailer guides note that WiFi extenders lose signal severely over that distance, so a bridge is the better tool.
Choose the easiest setup if you are not comfortable with networking, and the dual-gigabit kit if you run cameras or several devices on the far side.
A wireless bridge needs a clear line of sight between the two antennas. If trees or buildings block the path, a cable run or a different mounting point will serve you better.
Position the dish with a clear view of the sky and keep the router close to the dish. If the connection is still weak at a distant building, a point to point bridge can carry the signal across open ground.
Built-in WiFi reaches only so far from the router, and walls or distance can cut the signal. A bridge to a second building avoids relying on the router's range.
Bridge mode turns the router into a plain access point and turns off its routing. Only use it when another device handles routing, such as a bridge kit on the far side.
It is a pair of radios that connect two locations over the air, one at each end, so you can carry a network connection across open ground without cable.
Some bridges, such as the UeeVii CPE688, may support AP mode. Others work only as bridges, so check the listing before you buy.
Connect one bridge to the Starlink router and the other to your remote devices, then aim the antennas at each other. Pre-configured kits such as the eoqo pair are the simplest starting point.
Meet the reviewer

Fact-checker and content editor
Experienced researcher and AI content editor, having worked on various merchant websites. Experience in AI transcription, prompt engineering and taxonomy mapping for search engines.
Why trust CheckedBest
Our shortlist is built from four Amazon listings, checked for stock and compatibility with Starlink. We weighed range, supported power options, mounting and whether the kit comes pre-configured.
Our expert team tests products when it is needed and researches online and in interviews. Every guide is fact-checked and edited by a real person.
The CheckedBest editorial team · Updated Nov 8, 2026
How we pickEditorial standardsAffiliate disclosureReport a mistake
We earn a commission when you buy through our links, at no extra cost to you. It never decides the winner.