The Best Gun Vises for Cleaning and Gunsmithing

We earn a commission when you buy through our links, at no extra cost to you. How this works.

A gun vise holds your firearm steady while you clean it, mount a scope or do light gunsmithing, so you aren't wrestling with the gun on the bench. The Tipton Best Gun Vise is the one most reviewers point to as the all-round pick, because it fits a wide range of guns without scratching the finish.

Below are four options: the all-round winner, a ball-head model for working from any angle, a cheaper budget choice, and a budget-friendly pick that folds away. Each one is matched to a different kind of job.

The rundown

1Tipton Best Gun Vise, Gun Vises for Cleaning and GunsmithingTipton Best Gun Vise2Tipton Best Gun Vise 360, Gun Vises for Cleaning and GunsmithingTipton Best Gun Vise 3603Birchwood Casey Securelock Gun Vise, Gun Vises for Cleaning and GunsmithingBirchwood Casey Securelock Gun Vise4Tipton Ultra Gun Vise, Gun Vises for Cleaning and GunsmithingTipton Ultra Gun Vise
Best forBest overallBest for working from any angleBest budgetBest portable
MountingUniversal, bench-mountedBench bolt-down or removable C-clamps (not included)Not listedNot listed
Clamp materialNon-marring polymerNot listedNot listedNon-marring, glass-filled nylon
FrameNot listedNot listedRugged steelAll-steel, lightweight
Check price at AmazonCheck price at AmazonCheck price at AmazonCheck price at Amazon
1Best overall
Tipton Best Gun Vise, Gun Vises for Cleaning and GunsmithingTipton Best Gun Vise, Gun Vises for Cleaning and Gunsmithing, view 2Tipton Best Gun Vise, Gun Vises for Cleaning and Gunsmithing, view 3Tipton Best Gun Vise, Gun Vises for Cleaning and Gunsmithing, view 4Tipton Best Gun Vise, Gun Vises for Cleaning and Gunsmithing, view 5
1 / 5

Tipton Best Gun Vise

The all-round pick for cleaning, maintenance and light gunsmithing, with clamps that fit a wide range of stocks.

Mounting
Universal, bench-mounted
Clamp material
Non-marring polymer
Warranty
Limited lifetime (Tipton)

Most recommended by reviewers

Check price at Amazon

Prices and availability on Amazon change often.

Why we picked the Tipton Best Gun Vise

The Tipton Best Gun Vise is our pick for anyone who wants one vise that handles nearly every firearm they own, for cleaning, maintenance, scope mounting and light gunsmithing.

What sets it apart

Its parts move to fit different guns, so the same vise can hold a Glock pistol or a bolt-action rifle without swapping out hardware. The offset clamp is built to grip cheek risers and aftermarket stocks, and its non-marring polymer clamps are designed to protect the finish. Reviewers name it the most versatile vise for cleaning, maintenance, scope mounting and minor gunsmithing, and they describe its central channel as made of high-grade aluminum that feels rigid. A limited lifetime warranty from Tipton backs it up.

Worth knowing

It is built for cleaning and light work rather than heavy gunsmithing. For those jobs, a steel vise screwed to the bench will serve you better. Its clamp arrangement also means it is a bench-mounted tool, not something you can carry around.

If it's not for you, the Tipton Best Gun Vise 360 suits anyone who wants a swiveling ball head to reach every angle of a firearm, while the Birchwood Casey Securelock is the budget choice for a steel frame that folds for storage.

Read our full take

Why it's our top pick

The Tipton Best Gun Vise is the one reviewers keep returning to for everyday gun care. It is set up to handle bolt-action rifles, break-open shotguns and handguns, and its offset clamp accommodates aftermarket stocks without marring the finish.

It is not a heavy-duty workbench tool. For big jobs like changing a gas block or building a custom AR, reviewers suggest a steel vise bolted to the bench instead.

2Best for working from any angle
Tipton Best Gun Vise 360, Gun Vises for Cleaning and GunsmithingTipton Best Gun Vise 360, Gun Vises for Cleaning and Gunsmithing, view 2Tipton Best Gun Vise 360, Gun Vises for Cleaning and Gunsmithing, view 3Tipton Best Gun Vise 360, Gun Vises for Cleaning and Gunsmithing, view 4Tipton Best Gun Vise 360, Gun Vises for Cleaning and Gunsmithing, view 5
1 / 5

Tipton Best Gun Vise 360

A ball-head vise that swivels fully, so you can reach any part of the firearm.

Head
Swiveling ball head
Jaw pads
Non-marring, multiple sets included
Mounting
Bench bolt-down or removable C-clamps (not included)
Check price at Amazon

Prices and availability on Amazon change often.

Pros

  • Ball head gives full maneuverability
  • Multiple sets of non-marring jaw pads included
  • Good for scope mounting and cleaning
  • Pivots and rotates easily

Cons

  • Some owners say it does not stay put when torqued
  • Portable setup needs separate C-clamps
Read our full take

Why we like it

If the work calls for turning the gun in several directions, the ball head is the advantage. Owners praise how secure and adjustable the grip is for scope mounting and cleaning.

Check it under load before trusting it: one owner found it moved on the ball head when torquing a muzzle device, so tighten it down properly before you start.

3Best budget
Birchwood Casey Securelock Gun Vise, Gun Vises for Cleaning and Gunsmithing

Birchwood Casey Securelock Gun Vise

A low-cost steel-frame vise that collapses for storage and handles break-action guns and pistols.

Frame
Rugged steel
Feet
Adjustable, non-slip
Storage
Integrated multipurpose trays
Check price at Amazon

Prices and availability on Amazon change often.

Pros

  • Lowest price on the shortlist
  • Steel frame for a solid platform
  • Collapses for storage and transport
  • Non-marring pads and integrated storage trays

Cons

  • Fewer expert reviews back it than the Tipton models
Read our full take

Why it's our budget pick

The clamps adjust for break-action guns and pistols, and the integrated trays keep small parts in reach.

It is a good fit if you clean a few guns occasionally and want to spend less. Expect fewer expert reviews backing it than the Tipton models.

4Best portable
Tipton Ultra Gun Vise, Gun Vises for Cleaning and GunsmithingTipton Ultra Gun Vise, Gun Vises for Cleaning and Gunsmithing, view 2Tipton Ultra Gun Vise, Gun Vises for Cleaning and Gunsmithing, view 3Tipton Ultra Gun Vise, Gun Vises for Cleaning and Gunsmithing, view 4Tipton Ultra Gun Vise, Gun Vises for Cleaning and Gunsmithing, view 5
1 / 5

Tipton Ultra Gun Vise

A freestanding all-steel maintenance stand that folds down, so you don't need a bench.

Frame
All-steel, lightweight
Height
35 inches
Clamps
Non-marring, glass-filled nylon
Check price at Amazon

Prices and availability on Amazon change often.

Pros

  • Freestanding; no bench needed
  • Collapses for transport and storage
  • Removable accessory trays
  • Built-in bottle opener

Cons

  • Costs more than the bench-mount models
  • Less suited to a fixed workshop bench
Read our full take

Why it's the portable pick

If you don't have a workbench, this stand sets the gun at a comfortable 35-inch working height and folds away when you are done. The clamps are non-marring and the trays are removable for a tidy setup.

FAQ

Which gun vise suits you?

For everyday cleaning and maintenance, the all-round Tipton covers most guns. For scope mounting, the ball-head model gives more freedom. For a budget, the Birchwood Casey vise is the cheapest steel-frame option. If you don't have a bench, the freestanding Ultra stands on its own.

What to avoid?

Do not shoot from a gun vise. Reviewers warn it can break and injure you, so use a dedicated shooting rest for that. Choose a vise that won't mar the finish of the stock, barrel or mag well, and avoid oversized vises that are cumbersome on a bench.

What's the best gun vise?

The Tipton Best Gun Vise is the all-round pick for cleaning and maintenance. It fits a wide range of firearms and its non-marring clamps protect the finish.

What's the best gun vise for an AR-15?

For cleaning an AR-15, the Tipton Best Gun Vise works well. For changing a gas block or other heavy gunsmithing, reviewers suggest a steel vise bolted to the bench instead.

What's the best gun vise for cleaning rifles?

The Tipton Best Gun Vise handles bolt-action rifles and shotguns with its adjustable clamps. The ball-head Tipton 360 is also good if you need to reach every part of the rifle.

Why trust CheckedBest

How we made this guide

  • 4 Shortlisted picks
  • 4 Listings checked
  • 3 Expert sources

Our shortlist is built from four Amazon listings and 4 shown picks, each checked to be in stock. We weighed reviewer and owner opinions on how well each vise holds a firearm without marring it, and how it handles cleaning and gunsmithing work.

Our expert team tests products when it is needed and researches online and in interviews. Every guide is fact-checked and edited by a real person.

The CheckedBest editorial team · Updated Nov 8, 2026

Checking our work: 4 sources

We earn a commission when you buy through our links, at no extra cost to you. It never decides the winner.