IBOSAD Hydraulic Crimping ToolBest overall- Sizes
- 1/2, 3/4, 1 in copper; 3/8 to 1 in PEX copper rings
- Head rotation
- 350 degrees
- Body
- Aluminum alloy
Most recommended by reviewers
Check price at Amazon
IBOSAD Hydraulic Crimping ToolBest overallRunner-up2
VEVOR Hydraulic Press ToolBest for tight spacesWe earn a commission when you buy through our links, at no extra cost to you. How this works.
Pressing copper pipe is much faster than soldering, but the tool you choose decides whether the job is quick or exhausting. Hydraulic tools with a pump are the most-recommended style, while battery-powered versions cost more and add charging time. Our top pick, the IBOSAD Hydraulic Copper Pipe Crimping Tool, gives you a hydraulic press with dies for 1/2, 3/4 and 1 inch copper and a 30 degree jaw for tight spaces. The other picks trade price, power and jaw range differently.
1 IBOSAD Hydraulic Crimping Tool | 2 VEVOR Hydraulic Press Tool | 3 Growlush Pro Press Crimper Kit | 4 iCrimp IWS-1632CF Press Kit | 5 ROGVOC 18V Copper Press Tool | |
|---|---|---|---|---|---|
| Best for | Best overall | Best for tight spaces | Best budget | Best for Viega and ProPress | Best cordless |
| Sizes | 1/2, 3/4, 1 in copper; 3/8 to 1 in PEX copper rings | 1/2, 3/4, 1 in copper; 3/8 to 1 in PEX copper rings | 1/2, 3/4, 1 in copper; 3/8 to 1 in PEX copper rings | 1/2, 3/4, 1 in hexagonal jaws | 1/2, 3/4, 1 in VUS jaws |
| Check price at Amazon | Check price at Amazon | Check price at Amazon | Check price at Amazon | Check price at Amazon |
IBOSAD Hydraulic Crimping ToolBest overallMost recommended by reviewers
Check price at Amazon
VEVOR Hydraulic Press ToolBest for tight spaces
Growlush Pro Press Crimper KitBest budget
iCrimp IWS-1632CF Press KitBest for Viega and ProPress
ROGVOC 18V Copper Press ToolBest cordless




A hydraulic press with a 30 degree angle jaw that works in narrow spaces against walls.
Most recommended by reviewers
Check price at AmazonPrices and availability on Amazon change often.
The IBOSAD Hydraulic Copper Pipe Crimping Tool is our top pick for this search, since it pairs a hydraulic pump with a 350 degree rotating head and covers copper, stainless PEX and PEX copper rings in one kit.
A hydraulic pump gives steady pressure for each crimp, which is what sets this tool apart from manual-style crimpers that depend on hand strength. Its angle jaw and 350 degree head rotation make it practical for tight spaces against walls. Owners on r/plumbing say promising Amazon press tools are the ones with a hydraulic pump, and one original poster noted it seems promising even if only used for PEX fittings.
Only one reader community recommends this tool, so long-term reports are limited compared with more established options. Buyers who want more user feedback before committing may want to weigh that.
If it's not for you, the VEVOR Copper Pipe Crimping Tool suits anyone who needs the widest head rotation at 360 degrees, while the ROGVOC 18V Copper Press Tool suits buyers who want a cordless option despite its higher price.
The hydraulic pump is what community members point to when they say a press tool is worth buying over a manual crimper. This model pairs that pump with dies for copper and PEX sizes, and its 30 degree jaw is useful where a wall blocks a standard head. The aluminum body is designed to prevent oil leaks.
It is a sensible choice for a homeowner or trade who needs one tool to cover several pipe types.





A hydraulic press with eight dies and a head that rotates a full 360 degrees.
Prices and availability on Amazon change often.
If your work involves tee fittings and awkward corners, the full head rotation is the main reason to look at this tool. The retailer listing confirms the copper jaw sizes, and the eight-die kit covers both copper and PEX copper rings. It is a practical middle choice between hand tools and battery models.





A hydraulic crimper with eight dies and a storage case at a lower price.
Prices and availability on Amazon change often.
This kit gives you the same copper and PEX dies as the more expensive hydraulic tools for less money. The 80KN output and 360 degree head cover most residential jobs, and the case keeps the dies together. The listing advises keeping the fitting at least 1.5 inches from the wall, which matters in tight spaces.





A press kit with hexagonal jaws for Viega ProPress and a light that confirms a good connection.
Prices and availability on Amazon change often.
If you already use Viega ProPress or Elkhart fittings, this kit is built around those systems. The hexagonal jaws cover the three common sizes, and the light gives a visible check that the joint is complete. Including a copper cutter means the kit covers more of the job.





A battery-powered press with brushless motor, two batteries, a fast charger and carrying case.
Prices and availability on Amazon change often.
Community members who press often tend to prefer battery tools because they are faster than a hand pump. This kit includes everything needed to start, with two batteries, a charger and a case. It costs far more than the hydraulic tools, so it only makes sense for frequent use.
If you press copper only and want one tool, a hydraulic kit like the IBOSAD or the Growlush is a good start. If you use Viega ProPress fittings, the iCrimp kit is built for that system. If you press all day, a cordless tool such as the ROGVOC saves effort, though it costs much more.
Match the jaw size to your pipe, because a mismatched size gives a loose connection that can leak. Choose a metal-built tool, since weak build quality can cause loose crimps. Check that the fittings you buy are compatible with the tool's jaws.
Community members point out that fittings can cost more than the tool's time savings on refrigeration jobs. If you only press a few times, renting a power crimper or using another joining method may make more sense.
The IBOSAD hydraulic tool is our top pick, because it uses a hydraulic pump and has a 30 degree jaw for tight spaces. Choose based on the fitting type and how often you will use it.
The ROGVOC 18V cordless press is the battery option on this list. It includes two batteries and a charger, but costs much more than the hydraulic tools.
Crimping is faster and needs no flame, while soldering is cheaper per joint. Community members note that most professionals now prefer pressing for ease and speed.
Cut the pipe square, insert it fully into the fitting, place the jaw over the fitting and press until the tool completes the crimp. Start with clean pipe ends for a good seal.
A hydraulic crimper uses a pump to push the jaw closed around the fitting, compressing the fitting onto the pipe. The pressure creates a permanent, leak-resistant joint.
Why trust CheckedBest
We built this shortlist from five Amazon listings that were in stock when we checked, weighing jaw sizes, tool power, and fitting compatibility. Our recommendations draw on expert and community advice about pressing copper reliably.
Our expert team tests products when it is needed and researches online and in interviews. Every guide is fact-checked and edited by a real person.
The CheckedBest editorial team · Updated Nov 10, 2026
How we pickEditorial standardsAffiliate disclosureReport a mistake
We earn a commission when you buy through our links, at no extra cost to you. It never decides the winner.