Rode PSA1+Best overall- Mic weight range
- 0.25 to 1.2 kg
- Desk clamp thickness
- Up to 70 mm
- Rotation
- 360 degrees
Most recommended by reviewers
Check price at AmazonWe earn a commission when you buy through our links, at no extra cost to you. How this works.
If you run a podcast or streaming desk with a Shure SM7B, the arm does as much work as the mic. The SM7B is heavy and front-weighted, so a weak arm sags and needs constant readjusting.
The Rode PSA1+ is our top pick: it handles the SM7B's weight without drifting and runs silently. The Elgato Wave Mic Arm Pro is the runner-up, a smoother gas-spring arm with a slimmer profile, a good choice if your desk clamp and budget allow.
1 Rode PSA1+ | 2 Elgato Wave Mic Arm Pro | 3 Shure SH-BROADCAST2 | |
|---|---|---|---|
| Best for | Best overall | Runner-up, slimmer profile | Best low-profile desktop arm |
| Mic weight range | 0.25 to 1.2 kg | Not listed | Up to 4.4 lb (2.0 kg) |
| Desk clamp thickness | Up to 70 mm | Up to 60 mm | Up to 2.17 in thick |
| Check price at Amazon | Check price at Amazon | Check price at Amazon |
Rode PSA1+Best overallMost recommended by reviewers
Check price at Amazon
Elgato Wave Mic Arm ProRunner-up, slimmer profile
Shure SH-BROADCAST2Best low-profile desktop arm




The safest choice for an SM7B: it holds the mic's weight without drifting and runs silently.
Most recommended by reviewers
Check price at AmazonPrices and availability on Amazon change often.
The Rode PSA1+ Studio Boom Arm is the one we'd pick for an SM7B, because it is built to hold a heavy broadcast mic steady without slowly drooping.
Its listed range runs from 0.25 to 1.2 kg, and it fits desks up to 70 mm thick, so it has room to handle the SM7B plus a shock mount. Reviewers note that it holds heavy mics without a gradual drop, and that its internal spring damping moves quietly during a recording. Internal cable management also keeps the XLR run out of sight, which gives the setup a clean look.
It costs more than the entry-level arms in this group, and it works best on a solid desk. If you want the lowest price, the InnoGear arm is an option, but its 1.5 kg rating sits below the SM7B's weight at full extension.
If it's not for you, the Elgato Wave Mic Arm Pro suits a slimmer profile with a 3 kg capacity, and the Shure Deluxe Low-Profile Boom Arm suits anyone who wants a low desktop arm, though the SM7B sits close to its 2.0 kg limit.





A low-profile gas-spring arm rated for up to 3 kg, which covers the SM7B.
Prices and availability on Amazon change often.





Shure's own low-profile desktop arm, sized for the SM7B and designed to sit below the shoulder line.
Prices and availability on Amazon change often.





A low-cost, low-profile arm with magnetic cable channels, for smaller setups.
Prices and availability on Amazon change often.
Avoid the Neewer Professional arm with an SM7B. Expert review found its top joint drops under the mic's weight and its clamp feels cheap. Lightweight stands are also risky, since the SM7B is heavy enough to tip them.
The Rode PSA1+ is our top pick. It holds the SM7B's weight without drifting and runs silently.
A boom arm frees desk space and lets you position the mic precisely. A tabletop stand works if your budget is tight.
Attach the mic to the arm's threaded adapter, then tighten the joints so it stays put during recording.
Why trust CheckedBest
Our shortlist is built from four Amazon listings that are in stock now, checked against the weight and clamp specs that matter for a heavy dynamic mic. We weighed what expert reviews and reader forums say about how each arm holds an SM7B over time.
Our expert team tests products when it is needed and researches online and in interviews. Every guide is fact-checked and edited by a real person.
The CheckedBest editorial team · Updated Nov 10, 2026
How we pickEditorial standardsAffiliate disclosureReport a mistake
We earn a commission when you buy through our links, at no extra cost to you. It never decides the winner.